The front of the Oxa sensor has a small LED that displays different statuses by changing its color or illumination pattern. The different LED patterns indicate:
- Sensor’s connection to the Oxa Life app
- Battery charge level
- Awake / asleep
- Error
The LED fades off when Oxa is used in sleep monitoring mode.
|
Sensor Action |
LED |
Sensor state |
Battery |
Connection to Oxa Life app |
|---|---|---|---|---|
|
– |
Off |
Off or in sleep mode |
– |
– |
|
Connect to charger |
Red - solid |
Charging |
Charging |
Oxa cannot connect while charging. |
|
Green - solid |
Fully charged |
Fully charged |
||
|
Shake the sensor |
Blue - flashing |
Awake |
> 20% charged |
Ready to connect to the Oxa Life app |
|
Red - flashing continuously |
Awake |
Low (< 20% ) - needs to be charged |
||
|
Connect to app |
Blue - solid |
Awake |
> 20% charged |
Established Bluetooth connection to the Oxa Life app |
|
Blue - solid, interrupted by Red pulses |
Awake |
Low (< 20% ) - needs to be charged | ||
|
|
Red - flashes several times, then pauses |
Error. Contact Oxa support. Count the number of red flashes, if possible. |
||
- Charging: The Oxa sensor battery is rechargeable and lasts for about 30 hours before needing to be recharged. Recharging the Oxa sensor takes about 2.5 hours.
- Shake to wake. If the sensor does not connect to the app via Bluetooth within 2 minutes, the LED will turn off. After 10 minutes, the sensor will automatically go to sleep again and need to be shaken or moved to be discoverable for a Bluetooth connection.
- If the device does not show as being connected on your app, it is most likely connected to another phone. Disconnect the device from the other phone and try pairing again.
If your sensor status is not clear, connect the sensor to a charger. The sensor will reboot. If you continue to experience issues, check the troubleshooting guide to return your Oxa sensor to normal operation.